Miller Canvas is an authorized Ozroll Distributor for genuine Ozroll roller shutter components & parts, including the T20 Tubular motor powered by the Smart Drive / ODS & E-Port Controllers
PRODUCT INFORMATION (Genuine Part)
ODS & E-Series T20 Tubular Motor LOW VOLTAGE MOTOR 12 v not 240v
The T20 tubular motor has been specifically designed to suit the current Oz Roll Drive System using both the ODS & E- Series Controllers and is completely compatible with both the Standard and RF controllers.
With a lifting capacity twice that of the L10 mech and the ability to suit even the smallest head boxes, the T20 tubular motor retains all of the benefits of a low voltage /battery back up system.
It is simply the Smarter and Safer alternative to the current 240v system enabling operation during a power blackout and is not reliant on the services of a licensed electrician.
Installation is quick and simple with the T20 having mechanical limit settings and nominal speed of 16RPM. The limits are not set by the factory, but a tool is provided with each motor so you can set the "Up" and "Down" end limits. Download the instructions "Click Here" Please note: This can take up to 30 rotations of the limits screw on the motor head.
Drive Wheel Kits:
You will need a drive wheel kit if you are converting from a strap control or an L10 Mech they are available to suit both the 50mm round and 60mm Octagonal axles select these as an option.
Technical Specifications - T20 Tubular Motor
Nominal Torque: 20Nm
No Load Speed: 16rpm
Max Operating Current: 4.2 Amps
Nominal Voltage: 12 volts
Internal End Stop Limits: 32 turns
The Ozroll T20 Has A Maximum Lifting Capacity of 32kg
Curtain weight: 1sq mtr = 4kg = 8square meter of shutter (for example, 3200mm x 2500mm window maximum) or any other combination that equals 8 square metres or less.