Miller Canvas is an authorized Ozroll Distributor for genuine Ozroll roller shutter components & parts, including the low voltage Ozroll L10 15.121.000 motor assembly powered by the Smart Drive / ODS Control 10 & E-Port Controllers
PRODUCT INFORMATION (Genuine Part)
Part # 15.121.000 ODS L-10
The L10 is designed to fit in the end plate rather than inside the axle like other motors. Mounted to the end plate via two mounting holes located at the front .
The L10 is housed in tough die cast aluminium housing and is supplied with 2m of cable that connects to the wall plate. (5m is the maximum length of cable permitted).
The L10 is suitable to most end plates 160mm and above.
Technical Specifications - e-series L10
Nominal Torque: 10Nm
No Load Speed: 16rpm
Max Operating Current: 3.6 Amps
Nominal Voltage: 12 volts
Internal End Stop Limits: 18 turns
The Ozroll L10 Has A Maximum Lifting Capacity of 16kg
Curtain weight: 1sq mtr = 4kg = 4square meter of shutter (for example, 2000mm x 2000mm window maximum) or any other combination that equals 4 square metres or less.
Download the instructions "Click Here"
PLEASE NOTE:
You may be replacing an old Mech 10 Motor (pictured to the left) these are no longer available and have been superseded by the L10 motor above.
If replacing the old Meh 10 motor you will need one of the axle adapters below as well as a Red Axle insert for the \Idler end on a 50mm round aluminium axle..
